Fabric and Fabric Lamination
Reactive polyurethane Hot-melt Adhesives (PUR), its chemical structure of the NCO functional groups, and the moisture in the air crosslinking reaction, the formation of a great molecular weight of PU structure.
Solid at room temperature before use must be put to the oven or other heating equipment to a certain processing temperature (about 80-150 ℃), then the processing, so-called reactive hot melt adhesives.
- Long operation time, fast curing speed, soft after curing, low temperature operation and high initial adhesion. After curing process, the bonding result shows high strength and toughness.
APPLICATION TO END-USE PRODUCTS
- Applicable for lamination of TPU films, fabric to fabric, PVC sheets, PU sheets and fabric base lamination. Widely used in all kinds of clothing, light bags, bags & cases, medical products, water bladders, inflated beds and industrial fabrics, etc.
|INQUIRY||Item No.||Appearance||Viscosity (Vis.) (CPS/25℃)||100% Modulus
|Characteristic/ Application||Suggested Processing Temperature
|PR-6226||Paste||8000±2000 (100℃)||26-29||150-250||250-650||Long open time, high green strength, very soft after curing, application for the lamination of fabric and fabric.||90-110|
|PR-6226F||Paste||8000±2000 (100℃)||26-29||150-250||250-650||Long open time, high green strength, very soft after curing, application for the lamination of fabric and fabric.||90-110|
|PR-6507||Light Yellow, solid||10000±2000 (100℃)||25-30||250-300||400-600||For fabric and TPU film lamination||90-110|
|PR-6508||Paste||6000±2000 (100℃)||14-18||120-200||450-650||Water repellent type for fabric and TPU film lamination||90-110|
- Please contact us for other products which are not on this brochure.
- The above data are just for general reference and could not be used as guarantee document.